Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Union City?
Most gate repairs in Union City run $180 to $650, with the typical job landing around $320. A simple hinge or latch fix sits at the low end, while electric gate work (motor, control board, or safety sensor replacement) pushes toward $450 or more. Same-day diagnosis is common for gates that won’t open or close, and every estimate we give is free and upfront.
We only work on gates. Not fences, not decks, not general handyman work. That single-trade focus is why we can quote a number over the phone with confidence and carry the parts to back it up. From the motor to the hinge, this Gate Repair guide breaks down what service actually costs in Union City in 2026.
Key Takeaways
- Typical Union City gate repair: $180-$650, average around $320.
- Electric and automated gate repairs cost more than manual repairs because of the motor, control board, and sensor components involved.
- Union City’s salt air and Bay Area fog shorten gate hardware life, especially on west-facing properties near the shoreline.
- Free estimates and upfront pricing mean you know the number before we start.
Gate Repair Cost Breakdown (2026)
Here’s what individual repairs cost in Union City this year. Ranges reflect real jobs across residential and light commercial properties. Every number below is a range, and your exact price depends on the gate and the operator.
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Hinge repair or replacement | $180-$320 | Common on older manual swing gates; hardware wears faster near the Bay |
| Latch, strike, and alignment | $150-$280 | Sagging gates often need realignment, not just a new latch |
| Roller and track repair (sliding gates) | $220-$420 | Includes roller replacement and track adjustment |
| Electric gate motor/operator repair | $350-$750 | Depends on brand (LiftMaster, FAAC, BFT, Viking, and others) |
| Control board or receiver replacement | $280-$600 | Board cost varies widely by brand and age of the system |
| Safety sensor or loop repair | $220-$480 | Essential for automated gates; we won’t leave a gate operating without it |
| Remote / keypad reprogramming | $120-$220 | Ghost Controls, Linear, Mighty Mule, DoorKing, Elite all covered |
| Full electric gate tune-up | $200-$400 | Adjustment, lubrication, sensor check, battery and board inspection |
The biggest driver of cost is whether your gate is manual or automated. A manual gate repair is mostly labor and hardware. An electric gate repair adds the operator, the control board, and the safety components, each of which is its own part with its own price. Brand matters too. A Mighty Mule or Ghost Controls board costs less than a commercial-grade FAAC or BFT replacement because the parts sit at different price points. We work on all nine of the major brands, so we quote the actual part that fits your system, not the one we happen to have on the truck.
Age is the other factor. Systems installed more than a decade ago often use boards and motors that aren’t made anymore, which can push a repair up or make replacement worth pricing alongside it. We’ll tell you both numbers so you can decide.
What Affects Gate Repair Pricing in Union City
- Manual vs. electric. Electric gate repair is the higher-cost category because it involves a motor, a control board, receivers, and safety sensors. Manual repairs stay in the lower range.
- Brand and part availability. We’re trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Budget brands and commercial brands price differently, and older or discontinued parts can affect the total.
- Union City’s marine climate. Salt air and fog off the Bay are hard on gate hardware. Properties closer to the shoreline, and homes in the flat neighborhoods near the Bay, tend to see faster rust on hinges, latches, and rollers than homes in the hills east of Mission Boulevard. That shows up as more frequent repairs, not higher prices per job.
- Gate size and material. A wide driveway gate made of steel or heavy wood puts more load on hinges and operators than a smaller aluminum gate. Heavier gates wear parts faster and need reinforcement more often.
- Access and setup. A gate that’s hard to reach, buried in landscaping, or on a property with tight access can add time. We’re upfront about this in the estimate.
- Combined issues. A gate that won’t close might have a bad sensor and a misaligned hinge and a worn roller. Fixing several small things on one visit usually costs less than several separate visits.
If you’re deciding between repair and replacement, the honest answer depends on the gate’s age and condition. We price both and let the numbers talk. For a deeper look at what we handle, see our Gate Repair in Union City page and return to our home page for the full picture.
How to Save on Gate Repair
There’s no magic coupon that makes gate repair cheap, but a few practical moves keep the bill down:
- Fix small problems before they grow. A worn hinge that starts a gate sagging will eventually stress the operator or the frame. Catching it early keeps the job in the low range.
- Get one combined visit. If you know the latch is loose and the remote is finicky, tell us up front. Handling both on the same trip beats two call-outs.
- Keep the gate clear and lubricated. Trimming vegetation away from a sliding gate and keeping hinges and tracks clean reduces wear, especially in Union City’s salt-air environment.
- Know your brand. If you can tell us it’s a LiftMaster or a FAAC, we arrive with the right parts and diagnose faster. We work on all the major operator brands, so we’re unlikely to be stumped by an unfamiliar system.
- Ask about the parts, not just the labor. We explain what failed and why, so you can decide whether a repair or a new component makes more sense.
Every estimate is free. Call (833) 593-6430 and we’ll give you a real number for your gate, not a vague range.
FAQs – Gate Repair Cost
How much does gate repair cost in Union City?
Gate repair in Union City typically costs $180 to $650, with most jobs averaging around $320. Simple hinge and latch fixes land at the low end; electric gate motor, board, and sensor repairs sit higher. Call (833) 593-6430 for a free estimate on your specific gate.
Is it cheaper to repair or replace my gate?
Repair is usually cheaper when the gate frame and structure are sound and only the hardware or operator has failed. Replacement makes more sense when the frame is rusted through, badly bent, or the operator is discontinued. We quote both so you can compare. Call (833) 593-6430 and we’ll tell you straight.
How much does electric gate repair cost in Union City?
Electric gate repair in Union City runs about $350 to $750 for motor or operator work, and $280 to $600 for a control board or receiver replacement. Safety sensor and loop repairs fall around $220 to $480. The exact price depends on brand and part availability. Call (833) 593-6430 for a free estimate.
Can you come today?
Same-day service is often available for gates that won’t open or close, since a stuck gate can leave a driveway or parking area blocked. Availability depends on the day and location in Union City. Call (833) 593-6430 and we’ll tell you the soonest we can be there.
Why does salt air make gate repairs more expensive over time?
Salt air and fog accelerate rust and corrosion on hinges, latches, rollers, and metal frames, so hardware near the shoreline wears faster and needs replacing more often. It doesn’t raise the per-job price, but it does mean more frequent repair. Periodic lubrication and inspection keep the cost down. Call (833) 593-6430 to schedule a check.
Ready for a Straight Number on Your Gate?
We’re a gate-only specialist, and that focus is why we can quote your repair accurately and carry the parts for the systems you actually own. Whether it’s a manual gate that won’t latch or a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule operator that’s stopped responding, we work on it. From the motor to the hinge, we fix the whole system. Call (833) 593-6430 for a free estimate today.
Pricing reflects the Union City market as of 2026. Gate Repair Union City offers free estimates – call (833) 593-6430.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Heather Thompson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Amanda Quinn"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Miller