Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across East Palo Alto
If your gate is dragging, stuck, or refusing to open in East Palo Alto, we can usually diagnose the problem the same day and fix most mechanical issues on the first visit. Gate Repair Union City is a gate-only specialist serving the 94303 zip code and surrounding neighborhoods, from the Gardens to the blocks near University Avenue. We work on everything from sagging chain-link driveway gates to automated slide gates with motor and control board failures. Call (833) 593-6430 and we’ll walk you through what you’re seeing.
East Palo Alto gates fail in ways you don’t see in Palo Alto or Atherton. The bay-mud soil here shifts, posts lean, and gates that worked fine in September drag by February. Our Gate Repair team knows what’s under the ground in this city, not just what’s bolted to it.
Why Gate Repair Union City Is East Palo Alto’s Preferred Gate Repair Company
We only do gates. No fences, no decks, no handyman side work. Every truck carries gate-specific parts: galvanized hinges, tension springs, receiver boards, safety loops, welding gear. That focus means when we arrive at a house off Bay Road or Pulgas Avenue, we’re not improvising. We’re working from a parts inventory and a diagnostic process built entirely around gate systems.
Our technicians are trained on nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. East Palo Alto homeowners call us for the full range: manual hinge and post repairs on older wood gates, electric motor replacement on newer automated gates, and weld repairs on steel and chain-link frames. Gerardo Kendrick leads our team, and he’s the person you’ll often speak with when you call about a gate that won’t budge.
Most East Palo Alto repair calls get a same-week visit, and we carry enough hardware to handle the common local failures in a single trip. You get a written price before we touch anything. No surprise invoices.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in East Palo Alto
Driveway Gate Repair in East Palo Alto usually comes down to two problems: a post that’s leaning in bay-mud soil or hinges and latches that have rusted and seized from the damp winter fog. On compact lots throughout 94303, driveway gates are typically residential swing gates, chain-link or wood, often privacy-height and close to the property line. A typical driveway gate repair here runs $180 to $420 for hinge replacement, post straightening, and latch realignment, depending on whether the post needs a new concrete footing. Electric driveway gate motor repairs start higher, usually $350 to $800 including diagnostic time.
Post Footing and Realignment
The soil under East Palo Alto is expansive bay mud. Posts set without proper footings lean within a few seasons, and the gate drags against the ground. We excavate, pour a proper concrete footing, and reset the post plumb before rehanging the gate.
Hinge and Latch Replacement
Older galvanized hardware binds and rusts in the fog. We replace worn hinge sets with heavier-duty galvanized or stainless options and adjust latches so they catch cleanly even when the gate settles slightly.
Gate Welding in East Palo Alto
Gate Welding in East Palo Alto is often the fastest way to save a steel gate that’s cracked at the hinge or a chain-link frame that’s torn at the corner. We weld on-site, so you don’t have to unbolt a heavy gate and haul it anywhere. Typical weld repairs run $150 to $350 for a cracked hinge plate or corner joint, with more extensive frame repair adding labor based on access and the extent of the damage. A full steel gate rebuild isn’t usually worth it versus replacement, but localized welding extends a good gate’s life by years.
Cracked Frame and Hinge Welds
Steel driveway and side-yard gates take a beating from the seasonal moisture swing. Stress cracks form at the hinge welds and latch stiles. We grind, weld, and reinforce those joints so the gate doesn’t tear again in the next seasonal cycle.
Chain-Link Frame Repair
Chain-link gates on East Palo Alto lots are often cut to odd widths for tight side yards. When the frame bends or the mesh tears loose, we straighten the tubing, reweld the joints, and retension the fabric.
Trusted Brands We Service in East Palo Alto
We work on DoorKing and LiftMaster operators regularly in East Palo Alto, especially on multi-unit properties and newer automated driveway gates. Mighty Mule systems show up often on smaller residential setups where budget mattered at installation. We also service Elite, FAAC, and BFT commercial boards. Because we’re a gate-only shop, we keep common boards, remotes, and safety sensor parts on hand for these brands, which means less waiting for parts when your gate won’t open.
Your gate, fixed right. From the motor to the hinge.
Common Gate Repair Problems We See in East Palo Alto Homes
- Leaning posts from bay-mud soil. This is the East Palo Alto signature failure. Posts set without concrete footings lean and the gate drops, dragging against the driveway or walkway.
- Seasonal wood swelling and shrinking. Damp winter fog swells wood gates and they bind against the frame. Rainless summers dry the same gate until hinges loosen and latches misalign.
- Rusted hardware on privacy-height gates. Side-yard gates in East Palo Alto are often chained and padlocked for security. The hardware rusts and binds faster than the gate itself fails.
- Electric gate sensor and control board failures. Automated gates with safety loops and remotes stop responding, often after a winter of moisture in the sensor housing or a power surge to the board.
Because many East Palo Alto lots are built on bay-mud flats without proper post footings, gate posts lean and gates drag within a few seasons – a problem rarely seen in neighboring cities on firmer ground. That’s the first thing we check when a call comes in from the Gardens, Whiskey Gulch, or anywhere else in 94303.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in East Palo Alto, CA
Here’s what East Palo Alto homeowners should expect to pay for common gate repairs:
- Hinge replacement and latch realignment: $180 – $320
- Post excavation, new concrete footing, and reset: $350 – $650
- On-site weld repair (cracked hinge or frame): $150 – $350
- Electric gate motor or control board diagnosis and replacement: $350 – $800
- Full manual gate replacement (typical 4-to-6-foot side-yard gate): $450 – $900
What moves the price: whether a post needs a new footing, how heavy the gate is, and whether the hardware is standard or needs custom fabrication. We quote the full price before work starts. Call (833) 593-6430 for a free estimate, and we’ll give you a number you can plan around.
We Also Serve Cities Near East Palo Alto
Our Gate Repair in East Palo Alto service area extends to neighboring communities where soil conditions and housing stock are similar or, in some cases, very different. We work in Palo Alto, Atherton, North Fair Oaks, and Newark. If you’re on the edge of 94303 or just across the border, call us and we’ll let you know when we can be there.
Serving East Palo Alto, CA – Our Local Coverage Area
We’re based in the East Palo Alto area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in East Palo Alto
The gate drags because the post is leaning, not because the hinges are loose. Most East Palo Alto posts were set directly into bay mud without a concrete footing, and that soil shifts with moisture. Adjusting hinges only masks the problem for a few weeks. The permanent fix is excavating the post and pouring a proper footing before rehanging the gate. Call (833) 593-6430 if your gate is scraping the driveway.
Yes, and we do it on-site. Heavy farm gates and wide driveway gates in East Palo Alto typically fail at the hinge post or the hinge welds because the post carries more weight than a standard residential post. We weld frames, replace heavy-duty hinges, and reset posts with deeper footings that handle the load. Estimates for this kind of work are free.
Most post-fog automation failures in East Palo Alto are moisture in the safety sensor housing, corroded wire connections, or a control board fault. Check that the sensor lenses are clean and dry, and check whether your remote opens a different gate as a test. If the board is dead or the motor hums without moving, that’s a technician job. Call us at (833) 593-6430 and we’ll diagnose it.
Yes. We carry mobile welding equipment and handle cracked hinge plates, torn latch stiles, and broken chain-link corners on-site. Most weld repairs take under an hour once the gate is braced. The price is quoted before any work starts, and a mobile weld typically costs less than replacing the entire gate.
We install heavy-duty locking latches, reinforced hinge pins, and welded steel hasps that accept padlocks, so the gate can’t be lifted off its hinges or forced open with a pry bar. Many East Palo Alto side-yard gates are privacy-height and already chained; we upgrade the hardware so the gate actually holds. Call (833) 593-6430 and we’ll take a look at your setup.
Contact Us for Gate Repair in East Palo Alto
If your gate won’t open, won’t close, or drags every time you use it, call Gate Repair Union City at (833) 593-6430. We’ll talk through what the gate is doing, give you a straight answer about what it likely needs, and schedule a visit to your East Palo Alto property. Every repair starts with a free estimate and a written price before work begins.
Written by Gerardo Kendrick, Owner at Gate Repair Union City, serving East Palo Alto and the surrounding bay-area communities.