Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Newark
If your gate in Newark won’t open, sags on its hinges, or has an electric operator that stopped responding, we can usually get to you the same day. Our team knows the 94560 zip code well, from the older ranch tracts near Newark Boulevard to the neighborhoods closer to the bay. We work on everything from a 3-foot wooden side gate to a full driveway swing system with a LiftMaster or FAAC operator. Call us at (833) 593-6430 and we’ll give you a straight diagnosis and an honest price before any work starts.
Newark gates fail differently than gates in Fremont or Palo Alto. The marine layer moves in off the bay, the clay soil shifts under posts, and a lot of these 1950s and 1960s homes were built with gates that were never meant to carry modern hardware. That local knowledge means we don’t guess. We look at how your specific gate was built, where it binds, what’s corroded, and then fix it so it stays fixed.
Why Gate Repair Union City Is Newark’s Preferred Gate Repair Company
We only do gates. That’s the whole business. Our technicians don’t split their week between fences, decks, and gates; they work on gate systems every day, which is why they can diagnose a LiftMaster control board issue or a Mighty Mule arm fault in minutes rather than hours. For Newark homeowners who have an electric gate that won’t respond to a remote or a keypad, that focused expertise matters.
Gerardo Kendrick leads the team and has built our reputation around one simple idea: your gate, fixed right. Newark customers call us because we show up with the right parts, including stainless hinges, galvanized posts, and operator boards sized for both residential and light commercial systems. We know which brands last near the bay and which ones turn into problems. We carry parts for LiftMaster, FAAC, Elite, Mighty Mule, and other major names, so a repair is often finished the same visit rather than waiting a week for a bracket to ship.
We also understand what a gate failure means in a city like Newark. In many of the older neighborhoods, the side yard gate is the only rear access to the house. If it’s stuck, you can’t get your bins out, you can’t bring a ladder through, and your backyard is effectively blocked. That’s not a minor annoyance; it’s an access failure. We treat it that way.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in Newark
Wood Gate Repair in Newark is a year-round job, but winter and early spring are when we see the most calls. The rain swells the boards, the gate binds against the post, and if the hinges were already loose from summer dry-shrink, the whole thing starts to sag and scrape. In the 94560 tracts, a lot of these wood gates are original to the home, built to fit a side yard that was platted narrow. The panels are often custom width, and the posts are set in clay soil that has moved over 60 or 70 years.
In Newark, a typical wood gate repair runs $180 to $420 depending on whether we’re re-hanging the panel, replacing a rotten post, or rebuilding a section. If the gate is swollen but structurally sound, we can often plane and re-align it the same day. If the hinge screws have stripped out of a weather-softened post, we’ll reset the hinges with longer stainless fasteners or sister a new post in place. The goal is simple: the gate should swing smoothly with one hand and latch without lifting.
Hinge and Post Replacement
The most common wood gate failure in Newark isn’t the gate itself; it’s the hardware pulling out of the post. Wet winters soften the wood, and decades of clay-soil movement leave posts leaning just enough to bind the panel. We pull the old post when needed, set it in a proper concrete footing, and use galvanized or stainless hardware that won’t rust out in two years.
Weld and Rust Repair on Wood Gate Frames
Some Newark wood gates are hung on steel frames or have steel angle bracing along the back. The marine layer off the bay attacks that steel, and we often find the bottom rail rusted through while the wood face still looks fine. We cut out the rotted section, weld in new steel, and coat it before remounting the pickets.
Driveway Gate Repair in Newark
Driveway Gate Repair in Newark runs from a simple rehang of a sagging double swing gate to a full electric operator swap. Most driveway gates in the 94560 zip code are on older ranch homes where the driveway is wide enough for two cars but the gate was added years after the house. That means the posts may not have been sized for a heavy automated panel, and the operator may have been mounted without proper reinforcement.
We see two common problems: mechanical sag and electric failure. The mechanical side usually involves worn hinge pins, a bent post, or a panel that’s out of square. The electric side is often a control board that’s failed, a receiver that died, or actuator arms that have stripped their internal gears. For a standard driveway gate repair in Newark, you’re typically looking at $250 to $650. If the operator board is damaged beyond repair and you need a new circuit board or a full motor replacement, the job can run $600 to $1,400 depending on the brand and horsepower. A free estimate from us will put a fixed number on it before you decide.
Electric Operator Diagnosis
When a driveway gate won’t open or closes halfway and reverses, the problem is almost always in the operator, the safety loop, or the control board, not the gate panel. On a recent job off Newark Boulevard, we found a LiftMaster board that had corroded from trapped moisture, a common failure in the bay air. We replaced the board, checked the safety photocell, and had the gate running within the hour. When we install or repair an operator, we always verify the safety edges and photocells so the system meets UL 325, because a driveway gate that closes on a car or a child is a liability and a danger.
Gate Realignment for Settled Posts
Clay soil moves. In a dry Newark summer, the ground shrinks and posts can lean outward. In winter, the soil swells and pushes them back. Over 50 years, that back-and-forth leaves a driveway gate hanging crooked and dragging. We re-square the posts, shim or re-foot them, and replace the hinges rather than forcing a bent gate to work.
Trusted Brands We Service in Newark
We work on LiftMaster, Mighty Mule, FAAC, and Elite systems specifically, along with several other major gate and operator brands. That means if your Newark home has a Mighty Mule arm that whines but won’t move, we know what that motor sounds like when it’s failing and what to pull apart. If you have a FAAC or LiftMaster commercial system on a rental property, we can diagnose the board and replace it without spending a week on hold with the distributor. And because we carry common local-stock parts for these brands in our truck, many Newark repairs are done on the first trip.
Common Gate Repair Problems We See in Newark Homes
- Rusted hinges and hardware from the bay air: The marine layer off the San Francisco Bay concentrates moisture in the air, especially in the early morning. Plain steel hinges, screws, and latch hardware rust out in five to eight years on a Newark gate, a lot faster than inland.
- Wooden gates that swell and bind every winter: Rain-soaked boards expand, and a gate that fit fine in October is scraping by January. If the hinges are loose at the same time, the gate may not close at all until spring.
- Settled posts in clay soil: Newark’s soil is known for its shrink-swell movement. Side gate posts and driveway gate posts slowly tip, pulling the panel out of alignment and causing hardware to fail under side load.
- Electric operator failures on low-voltage systems: Gate motors need a clean, uninterrupted power supply and dry control board. Corroded connections, old wiring, and moisture intrusion cause intermittent operation and board failures that a standard handyman can’t diagnose.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Newark, CA
In Newark, a basic gate repair like a hinge replacement, latch adjustment, or a rehang is usually $180 to $350. A wood gate rebuild, post reset, or weld and rust repair commonly runs $300 to $700. Electric gate repair, including operator diagnosis, receiver or keypad replacement, and board swaps, is typically $350 to $900. A full new operator install for a driveway gate starts around $1,200 and can run higher for a commercial-grade system. These are Newark market numbers, not Fremont or East Palo Alto rates, and they account for the custom hardware this city’s narrow gates often require. The price is quoted and agreed before any work starts, always. Call us at (833) 593-6430 for a free estimate.
We Also Serve Cities Near Newark
While this page is focused on Newark, our team covers Union City, Fremont, East Palo Alto, and Alviso as well. If you’re in a nearby city and need Gate Repair, we can usually dispatch the same day. And if you’re on the edge of Newark and want to know exactly which neighborhoods we cover, see our Gate Repair in Newark page.
Serving Newark, CA – Our Local Coverage Area
We’re based in the Newark area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Newark
Newark sits close to the San Francisco Bay, and the marine layer drags salt-laden moisture over the city most mornings. That moist air condenses on cold steel hinges and hardware, accelerating rust. Plain steel hinges that would last 15 years in Tracy or Livermore often fail in under 8 years here. We use galvanized or stainless steel hardware on every Newark repair for that reason. Call (833) 593-6430 and tell us what you’re seeing; we’ll give you an honest recommendation.
Yes. Newark’s older tracts were platted at 50-foot lot widths, so many side yard gates in the 94560 zip code are 3 feet wide or less. Standard 4-foot hardware kits don’t fit those panels, which is why we custom-size hinges, brackets, and latch hardware on site or fabricate a drop-in replacement panel to match. That’s the kind of work that separates a gate specialist from a handyman. It’s also a big part of why our Newark estimates are detailed rather than generic.
It’s normal in Newark, and it’s fixable. Winter rain swells the wood, and if there’s not enough clearance between the panel and the post, the gate binds. Older ranch and Eichler-influenced homes in the 94560 zip code often have original gates with very tight clearances. We can add clearance while the wood is dry, seal the end grain, and adjust the hinges so the gate swings through all seasons. Please call us at (833) 593-6430 for a free estimate before the next rain.
The hinge post starts to lean, which puts all the gate’s weight on the hinges, and then the top hinge screws wallow out or the hinge leaf bends. Once the post moves in Newark’s clay soil, the panel’s geometry changes, and no amount of latch adjustment fixes a post that’s leaning 4 degrees. On an older home off Newark Boulevard, we regularly find the bottom hinge holding most of the weight while the top hinge is hanging on by a thread. We re-set the post and replace the hardware rather than patching a moving problem.
Yes. We repair and install automatic gate operators from LiftMaster, Mighty Mule, FAAC, and Elite, among others, and we verify the safety equipment on every electric gate we touch. That includes photocells, contact edges, and the force settings that must stop the gate from closing on a person or vehicle. In Newark, where a lot of these older gates were automated years after the original build, the backup safety hardware is often missing or failed. We don’t only fix the motor; we make sure the whole system operates safely.
Contact Gate Repair Union City in Newark
If your gate is sagging, stuck, rusted, or unresponsive, call us at (833) 593-6430 for a free estimate. We’ll ask what the gate is doing, tell you what we think it needs, and set a time to come look at it in Newark. The price is agreed before we start, and we won’t leave you with a gate that works for a week and fails in the next rain. We only do gates, and we do them right for Newark’s older homes, narrow side yards, and bay-air conditions.
Written by Gerardo Kendrick, Owner at Gate Repair Union City, serving Newark since the company’s founding.