Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Union City Homeowners
Gate Installation in Union City typically runs between $1,800 and $9,500 depending on whether it’s a welded steel driveway gate, a wood gate with an opener, or a full commercial sliding system. We’re Gate Repair Union City, and gates are the only thing we do, led by Gerardo Kendrick. That single focus means when we install a gate on a home near Alvarado Boulevard or a business near the Union Landing shopping center, the crew showing up carries gate-specific tools, gate-specific hardware, and the knowledge to get the post spacing and opener mounting right the first time. You can reach us at (833) 593-6430 for a free estimate. We quote the price before any work begins, so there are no surprises on the invoice.
Key Takeaways
- We only install and service gates. No fencing side projects, no handyman detours.
- Certified across nine gate and operator brands including LiftMaster, FAAC, BFT, and Mighty Mule.
- Full-system installation covers the gate, posts, hinges, operator, and safety sensors.
- Free estimates with upfront pricing. The number we quote is the number you approve.
- Residential and commercial gate systems, from single driveway gates to industrial slide gates.
Automatic Gate Installation
Automatic Gate Installation is the process of mounting a gate and pairing it with an electric operator, safety sensors, and remote or keypad access so it opens and closes without leaving your vehicle. Homeowners in Union City choose it for two reasons: controlled property access and the simple convenience of not getting out in the rain during a wet January. Our technicians handle everything from the first post hole to programming the last remote. Costs for a complete automatic system, gate and operator included, generally fall between $4,200 and $8,500 based on gate width, material, and whether you need vehicle exit loops.
Operator Pairing and Programming
We match the operator to the gate weight and duty cycle, not the other way around. A heavy steel gate on a light-duty opener fails early, so we calculate swing radius and load before recommending anything. We program remotes, keypads, and smartphone controls on site and test the full cycle at least ten times before we leave.
Safety Sensor Compliance
Every automatic gate requires photo eyes or contact edges that stop and reverse the gate if something is in the way. We install and position these sensors according to current UL 325 standards. This is not an optional add-on. It is part of the installation.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the complete job: evaluating your entry point, setting posts in concrete, hanging the gate, installing the hardware, and making sure the finished gate swings or slides without sag, bind, or drag. Our work starts with a site inspection in Union City neighborhoods like Decoto or the industrial corridors off Whipple Road, because post type and soil condition change how we pour footings. Most residential Gate Installation pricing lands between $1,800 and $5,500, with larger driveway or commercial systems running higher. Everything is quoted before we start, and that quote includes the concrete, hardware, and labor.
Post Setting Done Right
A gate is only as stable as the posts carrying it. We core and pour concrete footings below grade, brace posts level while they cure, and only hang the gate once the footing has set. Skipping that cure time is how gates sag within a year. We don’t skip it.
Hardware Selection by Weight
Gate hinges, rollers, and latches are rated for specific weights and cycles. We spec hardware based on the actual gate, whether that’s a light pedestrian gate or a 400-pound driveway gate. The hardware on a gate you open four times a day needs to be heavier than the hardware on a gate opened once a week, and we account for that.
Electric Gate Installation
Electric Gate Installation involves installing a gate, an electric motor, a control board, and the low-voltage wiring that ties it all together, then programming the system so access devices work reliably. This is where our single-trade focus pays off most. A general contractor can hang a gate, but diagnosing a control board or wiring an exit loop properly is a different skill set, and it’s the skill set our techs use every day. Expect a full Newark Gate Installation to run from $3,800 to $7,500 depending on whether you choose a swing or slide configuration and how many access points you need.
Control Board and Wiring
We run and protect low-voltage wiring from the operator to the keypad, call box, and safety devices. The control board gets configured for hold-open time, obstruction sensitivity, and accessory integration. We test every input and output with a multimeter so the system works on day one and keeps working.
Access Options That Fit You
Remote transmitters are standard, but we also install keypads, card readers, and vehicle-detection loops for hands-free entry. Whether you want a simple two-button remote or a full access setup for a rental property, we configure the system to your actual use pattern. You shouldn’t pay for features you’ll never touch.
Driveway Gate Installation
Gate Installation – Fremont is the most common residential project we do in Union City. It means fitting a gate across the width of your driveway, usually swing or slide style, and anchoring it to posts designed to handle daily cycling. Driveway gates on Mission Boulevard or the hillside streets above Decoto face different wind loads and slope conditions, and we adjust the installation accordingly. A standard single driveway gate with a manual latch starts around $1,800, while an automated driveway gate with an operator and remote access typically runs $4,000 to $7,200. The price is always agreed before we break ground.
Swing vs. Slide on a Slope
Sloped driveways often work better with a slide gate than a swing gate because a swinging leaf has to fight the grade. We measure the slope, look at setback space, and tell you which configuration makes sense before you spend a dollar. Some driveways can’t fit a slide gate, and we’ll tell you that too.
Pedestrian Access Planning
If the driveway gate is your main entry, you’ll want a separate pedestrian gate or a keypad arrangement so people don’t have to wait for a full vehicle gate to cycle. We plan this during site evaluation and often install a matching pedestrian gate beside the driveway gate. This keeps foot traffic from wearing out cycles on a gate sized for cars.
Sliding Gate Installation
Sliding Gate Installation is for properties where a swing gate isn’t practical: short setbacks, steep driveways, or wide commercial entries. The gate rides on a track or cantilever rollers and moves horizontally instead of arcing outward. We install V-track slide gates, cantilever systems that never touch the ground, and heavy industrial slides for commercial lots in Union City. Sliding gate installations generally start around $3,200 for a basic residential track system and run up to $9,500 or more for wide commercial cantilever gates with full automation.
Track or Cantilever
Track systems work well on flat, clean surfaces where the track won’t get packed with debris. Cantilever gates ride above the ground and are the better choice on gravel drives or anywhere that collects leaves and mud. We look at the site and recommend the system that won’t bind up when the ground shifts.
Wide Commercial Slides
Commercial sliding gates cycle dozens of times a day and need operators rated for continuous duty. We’ve installed slide gates at commercial properties around Union City with operators sized for high cycle counts and battery backup for power outages. These are not residential openers bolted to a bigger gate. We spec the right equipment.
Gate Opener Installation
Gate Opener Installation is the process of adding an electric operator to an existing manual gate or replacing an old opener on a gate that already swings or slides. If your current gate hangs fine but you have to leave the car to open it every time, an operator is the fix. We install swing-arm openers, slide openers, and underground systems, then wire the controls and program your remotes. Installing an opener on an existing gate in Union City typically costs between $1,400 and $3,500 depending on operator type, gate weight, and whether we need to add safety sensors.
Retrofitting a Manual Gate
Not every manual gate can take an opener. We check post depth, hinge type, and gate weight first. If the gate is too heavy or the posts aren’t solid, the opener will tear itself apart. We’ll tell you honestly whether your existing gate is a good candidate or whether a new gate is the better investment.
Opener Brand Selection
We work with LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, so we can match the opener to your gate size and duty cycle. A Mighty Mule kit works fine on a light residential gate, and a FAAC hydraulic operator is the right call for a heavy commercial slide. We don’t push one brand. We push the right one.
Gate Fabrication
Gate Fabrication is the process of building a gate to the exact dimensions and design your property needs rather than pulling a stock unit off a shelf. When an opening is wider than standard, a driveway has an unusual angle, or you want a specific look in a Union City neighborhood, fabrication is the answer. We work with local fabricators to produce steel gates, aluminum gates, and decorative gates built to the measured opening, then we handle the installation and automation. Custom fabricated gate projects typically start around $3,500 and range to $9,500 or more depending on size, material, and finish.
Custom Sizing for Odd Openings
Stock gates come in set widths, and forcing one into an odd opening means gaps or unstable posts. We measure the actual opening, account for hinge and latch clearance, and order a gate built to those dimensions. That’s how you get a gate that closes with a consistent gap on every edge.
Finish and Corrosion Resistance
Union City’s bay air and winter rain mean steel gates need a proper finish. We specify galvanized or powder-coated steel for outdoor gates so they don’t start rust streaking in two seasons. The finish choice is part of the fabrication spec, not an afterthought.
Brands We Service
We’re trained and certified on nine gate and operator brands, which covers virtually any system a Union City homeowner or property manager is likely to own. LiftMaster is the most common residential operator we encounter, and we know their swing and slide models well enough to install and program them without a manual on the bench. FAAC and BFT hydraulic and electromechanical operators show up most often on commercial and multifamily gates, and we stock hardware and common replacement boards for both lines.
Mighty Mule and Ghost Controls are the budget-friendly DIY-style systems, and we regularly replace DIY installs where the wiring or post mounting wasn’t solid. Since we only do gates, our vans carry parts and tools for these specific brands rather than a random mix of unrelated trade supplies. Whether you have one of these brands or something less common, call us at (833) 593-6430 and we’ll tell you exactly what you’re working with and what it takes to fix or replace it.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate sags or scrapes the ground. This usually means a post has shifted or a hinge has worn through. Continuing to cycle the gate compounds the damage and can eventually snap the hinge welds, dropping the gate leaf.
- The opener runs but the gate doesn’t move. A motor that hums without moving the gate often points to a broken gear or a failed capacitor, not a bad motor. Running it repeatedly while it’s stuck can burn out the operator entirely.
- The gate reverses on its own or stops mid-cycle. This is frequently a misaligned safety sensor or an obstruction setting that’s too sensitive. It’s also how gates trap vehicles or clip pedestrians, so it needs to be adjusted with the right equipment.
- Remotes work intermittently or lost programming. If some remotes work and others don’t, the issue could be receiver limits, antenna placement, or a dying battery in one transmitter. A tech with a signal tester can sort it out in one visit instead of guessing.
- You hear grinding or clicking near the hinges or track. Grinding in a slide gate usually means roller bearings are shot or the track has debris packed in it. Clicking on a swing gate often means the actuator arm is loose. Both get worse every cycle and eventually lock the gate in place.
Our Process, Step by Step
- 1
Site inspection and measurement. We come out, measure the opening, check the ground slope, locate power access for automated systems, and note anything that would affect the installation: nearby trees, irrigation lines, uneven concrete. This visit is free and takes about an hour.
- 2
Written quote with a fixed price. We put the entire job on paper: gate material and dimensions, opener model if applicable, post and footing work, safety sensors, and labor. You approve the number before we schedule anything. No change orders unless you add scope.
- 3
Post setting and curing. We dig footings below grade, set and brace posts level, and let the concrete cure properly. For heavier gates, we spec deeper footings and larger-diameter posts. This is the step that determines whether your gate still operates smoothly in five years.
- 4
Gate mounting and operator installation. We hang the gate, adjust hinges or rollers for even clearance, mount the operator, run control wiring, and install safety sensors. Every system gets cycled repeatedly while we watch for binding, drift, or lag.
- 5
Programming, testing, and walkthrough. We program all remotes and keypads, test the safety reversal, and run the gate through full cycles in both directions. Then we walk you through operation and hand you a quick reference card. If anything acts up later, call us.
How Much Does Gate Installation Cost in Union City?
A typical manual driveway gate installation in Union City runs $1,800 to $3,500. An automated single driveway gate with an operator, two remotes, and safety sensors typically lands between $4,200 and $7,200. Commercial sliding gates and custom fabricated gates are the high end: $5,500 to $9,500 or more depending on width, materials, and duty cycle requirements. These ranges reflect what we see across Union City neighborhoods, from the older lots near Alvarado Boulevard to the newer developments on the city’s east side.
| Project Type | Typical Price Range |
|---|---|
| Manual single driveway gate | $1,800 – $3,500 |
| Automated single driveway gate | $4,200 – $7,200 |
| Gate opener added to existing gate | $1,400 – $3,500 |
| Custom fabricated gate | $3,500 – $9,500+ |
| Commercial sliding gate system | $5,500 – $9,500+ |
What moves the price: gate width and weight, swing versus slide, operator type, access control extras, and whether existing posts can be reused. The way to avoid overpaying is to get a written quote that itemizes materials and labor, and to ask whether the installer stocks gate-specific hardware or will be making multiple trips to a supplier. Our free estimate includes measurements, a written price, and the exact scope of work. Call (833) 593-6430 to schedule one.
Our Service Area Near Union City
We install gates all over Union City and the surrounding East Bay. You’ll find our work on homes in Fremont, driveways in Pleasanton, and commercial lots in San Leandro, Newark, and Hayward. We also take calls from Palo Alto, East Palo Alto, Menlo Park, San Lorenzo, Alviso, Fairview, and North Fair Oaks. If you’re anywhere near the 880 corridor or the Dumbarton Bridge side, we can get to you. For gate repair work, see our home page for the full scope of what we handle.
Serving Union City, CA – Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Union City
Gate installation is the process of setting posts, hanging a gate leaf, installing hardware, and for automated gates, adding an operator, wiring, and safety devices. In Union City, it covers everything from a single walk-through gate on a side yard to a full commercial slide gate with vehicle detection loops. The job is done when the gate opens, closes, latches, and auto-reverses correctly.
Most residential gate installations take one to two days on site, plus concrete curing time for post footings. A simple manual gate can go in a day. Automated systems with wiring, sensors, and access programming usually need a second day for programming and testing.
Residential gate installation in Union City ranges from about $1,800 for a basic manual gate to $7,500 or more for a fully automated driveway gate. Custom fabrication and commercial systems run higher, up to $9,500 and beyond. Call (833) 593-6430 and we’ll measure your opening and give you a fixed written quote.
Yes. We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, along with five other major brands. That covers the openers most homes and commercial properties in Union City actually use. If you tell us the brand and model on the phone, we’ll bring the right parts on the first trip.
For urgent gate issues, like a gate stuck open and a property that’s unsecured, call us at (833) 593-6430 and we’ll get a technician scheduled as soon as possible. We prioritize safety-related failures, including gates that won’t close or automated gates that reverse unpredictably. Every job is still quoted and approved before work starts.
We stand behind our installation work and the hardware we supply. If a hinge binds, an opener fails, or a weld cracks due to an installation issue, we come back and address it. We’ll walk you through what’s covered for your specific project when we provide the quote.
Clear the work area of vehicles, trash bins, and anything within the swing path or slide track zone. If you have pets, keep them inside during the work. Let us know about buried sprinkler lines or invisible fences near the entry, since we’ll be digging post holes and need to know what’s underground before we start.
Schedule Your Gate Installation Service in Union City Today
If you’re ready for a gate that opens, closes, and locks the way it should, call us at (833) 593-6430. We’ll set up a free on-site estimate, give you a fixed written price, and schedule the installation at a time that works for you. No obligation, no pressure. From the motor to the hinge, your gate fixed right.
Written by Gerardo Kendrick, Owner at Gate Repair Union City, serving Union City and the surrounding East Bay.