Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Union City, CA
Gate installation in Union City comes with a set of conditions we don’t see in many other Bay Area cities. The housing stock runs heavily toward 1950s through 1970s tract homes where original gates are now decades old, and the Hayward Fault runs directly through town, which means posts shift and gates fall out of alignment after even minor seismic movement. We’re Gate Repair Union City, and gates are the only thing we do. Call us at (833) 593-6430 when a gate stops working the way it should.
Why Union City Homes Are Different
Union City sits on the Hayward Fault, and that single fact shapes more gate repairs here than any other. A gate that suddenly drags on the ground or won’t latch usually hasn’t broken in the traditional sense; the post has tilted or the ground has settled, shifting the entire frame out of square. We check for that first because fixing the gate itself when the post has moved means you’ll be calling us again in six months.
The homes themselves add another layer. Most single-family properties in Union City were built between the mid-1950s and late 1970s, and their original gates have been repainted so many times that hinges seize and latches corrode under layers of paint. The Decoto and Union City neighborhoods especially have aging wooden and metal gates that were installed when these tracts went up, and they’re now at the end of their service life. Winter fog from the Bay keeps wood damp through the morning, and summer heat dries and warps it. That cycle is hard on a gate.
We also see a lot of requests from homeowners who’ve added automatic openers to gates built decades before automation existed. The retrofit often works, but the underlying gate needs to be solid first. A warped wooden gate will burn out a new operator faster than anything else we encounter.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Union City Services
Most calls we take in Union City fall into two buckets: the gate itself has failed mechanically, or the electric system that runs it has stopped responding. Both live under one roof with us.
Gate Repair in Union City
Mechanical gate repair in Union City usually means one of three things: seized hinges, a rusted or broken latch, or a gate that’s dropped out of alignment because the post has moved. Given the clay soil and fault activity here, alignment work is constant. We also rebuild gates that have rotted at the bottom rail or pulled away at the frame joints. If your gate sticks in winter and slams loose in summer, that’s a repair we handle regularly. Gate Repair in Union City covers the full scope of what we do.
Electric Gate Repair in Union City
Electric gate failures in Union City run from dead remotes and receiver range issues to control boards that won’t respond and operators that hum but don’t move. We work on systems from Mighty Mule and Ghost Controls up through FAAC, BFT, DoorKing, LiftMaster, Viking, Linear, and Elite, so we’re not guessing at wiring diagrams or board layouts. Electric Gate Repair in Union City is where we document the full diagnostic and repair approach.
Gate Installation in Union City
Gate installation in Union City typically means replacing a gate that’s been on the property since Nixon was in office. The original wooden or chain-link gates on 1950s and 1960s tract homes have been repainted, patched, and rehung more times than they can take, and the damp-winter, dry-summer cycle has done its work. Newer townhomes in the Union City Station area often need metal driveway gates with automatic openers installed or replaced. We handle the full job, from setting posts in soil that shifts with the Hayward Fault to mounting the operator and programming remotes. Gate Installation is one of the three core services we offer, and it’s the one that gives Union City homeowners a clean start on a gate that will actually hold its alignment.
Automatic Gate Installation
Signs you need it
A gate you have to open by hand every time, or an existing opener that struggles, reverses, or trips its breaker regularly, means the operator is undersized or the gate itself is dragging.
What it costs in Union City
Automatic gate installation in Union City, including the operator and swing-arm or slide hardware, typically runs $1,800 to $6,500 depending on gate size and operator type.
How we do it
We verify the gate hangs level and moves freely before anything else, mount the operator on a reinforced post or pad, run power to a dedicated circuit, and program remotes and keypads on site.
Sliding Gate Installation
Signs you need it
A driveway with limited setback room behind a swing gate, or a wide driveway where a swing gate would block the sidewalk or the street, is the standard case for a sliding gate.
What it costs in Union City
Sliding gate installation in Union City typically ranges from $3,500 to $12,000, with the track, motor, and gate frame as the main cost drivers.
How we do it
We pour or anchor a level track bed, set the cantilever or track rollers, hang the gate so it moves with one hand, then add the motor, safety edges, and remote system.
What Gate Installation Costs in Union City
| Item | Typical range in Union City |
|---|---|
| Manual gate installation | $800 – $2,500 |
| Automatic gate installation | $1,800 – $6,500 |
| Sliding gate installation | $3,500 – $12,000 |
Every quote we give in Union City is the price you pay. We walk the site, measure, check the posts, and write a fixed number before any work starts. No surprises on the invoice.
Do you handle the electrical run for an automatic gate?
Yes. We run the power from an existing circuit or add a dedicated one, mount the operator, install safety edges and photo eyes where required, and program the remotes and keypads before we leave.
How long does a gate installation take in Union City?
Most single driveway gate installations take one to two days from setting posts to final programming. Sliding gates and larger steel driveway gates can run three days. We’ll confirm a schedule when you call (833) 593-6430.
Brands We Service in Union City
We’re factory-trained and service LiftMaster, FAAC, and Viking systems plus Mighty Mule and Ghost Controls for budget-conscious setups, and Elite for heavier commercial gates. Parts for common failures are kept in our service vehicles, which means most board and receiver replacements happen on the first visit. Our brands page lists everything we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Union City, CA
| Service | Typical range in Union City |
|---|---|
| Gate repair | $150 – $375 |
| Gate opener repair | $225 – $650 |
| Gate sensor replacement | $150 – $350 |
| Manual gate installation | $800 – $2,500 |
| Automatic gate installation | $1,800 – $6,500 |
| Sliding gate installation | $3,500 – $12,000 |
| Gate post repair | $250 – $600 |
| Gate lock / latch replacement | $150 – $300 |
| Electric gate troubleshooting | $125 – $250 |
| Full gate replacement | $1,200 – $6,000 |
Union City pricing gets pushed up by two things mainly: fault-shifted posts that need resetting before a gate can be rehung, and heavy repaint buildup that has to be stripped or ground off hardware before we can work on it. Whatever the job, you get the final number before we touch the gate.
Neighborhoods We Serve in Union City
We work across all of Union City, from the older Decoto streets to the townhome developments near Union City Station and the residential blocks east of Mission Boulevard.
- Decoto
- Union City Station area
- Alvarado
- Seven Hills
- Contempo
Most Union City addresses are reachable the same day for emergency gate repairs, and we schedule installations within the week.
Service Area – Cities Near Union City
Our service area extends beyond Union City to the neighboring communities. We regularly run jobs in Newark, CA, Fremont, CA, Fairview, CA, and San Lorenzo, CA. If you’re a few minutes outside Union City, call (833) 593-6430 and we’ll tell you straight whether we can get to you this week.
Serving Union City, CA – Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union City
Most repair calls in Union City are answered the same day, and many the same afternoon depending on where you are and what’s failed. Emergency repairs, like a gate stuck open, are priority. Call (833) 593-6430 and we’ll give you an honest arrival window.
For a like-for-like gate or operator replacement, usually not. New installations with new footings or electrical runs can require a permit depending on scope. We’ll tell you what’s needed for your specific property when we look at it.
Yes. Many of those complexes use automatic metal driveway gates with LiftMaster, FAAC, or DoorKing operators, all brands we service. We’re familiar with HOA requirements in the area and can work with your property manager on access scheduling.
Need a gate installed, repaired, or automated in Union City? Call Gate Repair Union City at (833) 593-6430 for a free estimate. We only do gates, so the person on the phone knows the difference between a hinge and a board, and the tech in your driveway knows the same.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Union City Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Heather Thompson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Amanda Quinn"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Miller