Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in East Palo Alto, CA
Gate installation in East Palo Alto runs into a specific set of conditions we see on nearly every job: 1940s-to-1970s ranch homes on compact lots, bay-mud soil that shifts seasonally, and gates that were originally built for privacy and security more than convenience. We’re Gate Repair Union City, a gate-only specialist serving East Palo Alto since 2018, and we handle everything from a sagging manual side-yard gate to a fully automated driveway slide gate on a new infill build. Call (833) 593-6430 for a free estimate on installation or repair.
Why East Palo Alto Homes Are Different
East Palo Alto sits on flat bay-side land south of San Francisco Bay, and that geography shapes the gate work here. The soil is expansive bay mud that holds moisture through the foggy winter and dries hard in the rainless summer. Posts set without proper footings lean within a few seasons, and gates that dragged in January often bind again by August as the ground shifts. The housing stock compounds this: most homes in the 94303 ZIP are single-story ranch and postwar tract houses built between the 1940s and 1970s, with narrow side yards and rear-alley or driveway access. Gates here are typically wood or chain-link with older manual hinges, and the galvanized hardware rusts and binds faster than it would inland.
We also see a distinct split in demand. Long-time owners and landlords in neighborhoods like the Gardens and the blocks near Whiskey Gulch often want functional, budget-conscious repairs: a sagging post re-set, a latch that finally lines up, a chain-link gate that stops dragging. Newer arrivals and infill developers building two-story homes or ADUs on those same lots more often ask for automatic slide or swing gates with keypads and vehicle sensors. Both jobs require the same thing: a technician who knows how East Palo Alto’s soil, fog, and tight lot geometry affect the way a gate is hung, framed, and automated. That’s the work we focus on every day.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main East Palo Alto Services
Two services account for most of the calls we get from East Palo Alto homeowners and property managers: mechanical gate repair and electric gate repair. Each has its own dedicated East Palo Alto page, but here’s what each one actually involves on the ground here.
Gate Repair in East Palo Alto
Most mechanical repairs in East Palo Alto come down to three problems: posts leaning out of the bay mud, hinges rusted or pulled loose from weathered stucco posts, and latches that no longer line up after a season of swelling and drying. We re-set posts with proper footings, replace galvanized hardware with materials suited to the local moisture, and re-hang gates so they swing without dragging across a driveway lip or side-yard paver. We work on wood, chain-link, and steel gates, and we carry the common hinge, latch, and post hardware on the truck so most repairs are completed in one visit. For the full scope of what we handle, see Gate Repair in East Palo Alto.
Electric Gate Repair in East Palo Alto
When an automatic gate won’t open from the remote, the problem usually sits in the operator, the control board, the safety sensors, or the receiver, not the gate itself. That’s the distinction that matters. We diagnose the entire system: motor, board, loop detectors, edge sensors, and remotes. In East Palo Alto, we frequently see older Mighty Mule and LiftMaster operators on 1970s-era driveway gates where moisture has crept into the control housing, plus newer DoorKing and Elite slide operators on infill construction. We carry boards, receivers, remotes, and sensor hardware for the brands we service, so the fix is usually completed in one trip. Read more at Electric Gate Repair in East Palo Alto.
Gate Installation in East Palo Alto
New gate installation in East Palo Alto usually means one of two jobs: replacing a rotted or leaning manual gate on an older ranch home, or building and automating a security or driveway gate for a newly constructed or renovated property. The site conditions are consistent across the city: compact lots, narrow side yards, and bay-mud soil that demands a proper footing if the new gate is going to stay square past the first winter. We handle every part of the job, from removing the old gate and posts to hanging, aligning, and finishing the new system. For the full service detail, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a driveway gate, or a new build requires controlled vehicle access.
What it costs in East Palo Alto
Automatic gate installation in East Palo Alto typically runs $6,800 to $14,500 for a full system including operator and controls.
How we do it
We set posts on proper footings, hang the gate, mount the operator, run control wiring, install safety sensors, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
The existing driveway gate has rotted, sagged past repair, or no longer provides the security or privacy the property needs.
What it costs in East Palo Alto
Driveway gate installation in East Palo Alto typically runs $3,200 to $8,900 depending on material, width, and whether automation is included.
How we do it
We remove the old gate and posts, pour new footings sized for the gate’s weight and the local soil, set pressure-treated steel-reinforced posts, hang and align the gate, and install the latch or operator.
What Gate Installation Costs in East Palo Alto
| Item | Typical range in East Palo Alto |
|---|---|
| Manual driveway or side-yard gate, installed | $1,800 – $5,400 |
| Automatic gate system with operator | $6,800 – $14,500 |
| Custom or oversized gate, installed | $12,000 – $26,000 |
Prices are quoted and agreed before any work starts, so there are no surprises on the invoice. We’ll give you a written price after measuring the site.
Do you handle the power run and safety sensors on an automatic gate?
Yes. We run the low-voltage control wiring, mount the operator, install the photo-eye safety sensors and edge sensors, and program the remotes and keypad. The only part we don’t handle is the high-voltage electrical feed to the operator’s outlet, which requires a licensed electrician.
How long does a gate installation take in East Palo Alto?
Most manual gate installations are done in one day. Automatic installations usually take one to two days, depending on concrete cure time, wiring runs, and how much old material has to be removed first. Call (833) 593-6430 and we’ll give you a realistic timeline for your specific site.
Brands We Service in East Palo Alto
We work on LiftMaster, DoorKing, Elite, and Mighty Mule systems specifically, plus FAAC, BFT, Linear, Viking, and Ghost Controls. Because gates are all we do, we stock common boards, remotes, receivers, and sensors for these brands locally, which keeps turnaround on most repairs to a single visit. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in East Palo Alto, CA
| Service | Typical range in East Palo Alto |
|---|---|
| Gate repair (minor: latch, hinge, alignment) | $160 – $475 |
| Gate repair (major: post reset, section rebuild) | $650 – $1,900 |
| Electric gate repair (diagnostic, board, sensor, receiver) | $300 – $1,250 |
| Electric gate repair (operator or motor replacement) | $900 – $2,900 |
| Manual gate installation | $1,800 – $5,400 |
| Automatic gate installation | $6,800 – $14,500 |
| Custom or oversized gate installation | $12,000 – $26,000 |
| Gate opener motor replacement | $700 – $2,200 |
| Control board replacement | $350 – $1,050 |
| Remote or keypad replacement | $90 – $260 |
In East Palo Alto specifically, prices get pushed up by bay-mud soil that often requires deeper footings and by the number of older gates where a previous installation was done without concrete at all, so the job starts with excavation rather than a simple swap. Whatever the scope, we quote the price in writing before any work begins and stick to it.
Neighborhoods We Serve in East Palo Alto
We work throughout the 94303 ZIP and every corner of East Palo Alto, from the Gardens to the blocks near Whiskey Gulch to the newer infill homes going up across the city. Most of our calls come from homeowners and property managers dealing with a gate that has shifted out of alignment or stopped responding to the remote.
- The Gardens
- Whiskey Gulch area
- Palo Verde
- Eastside
- Gloria Way area
Service Area – Cities Near East Palo Alto
We also serve the surrounding Peninsula and East Bay cities. Homeowners in Palo Alto, CA and Atherton, CA often call us for automatic gate work, while North Fair Oaks, CA and Newark, CA keep us busy with manual gate repair and new installations. If you’re anywhere within a short drive of East Palo Alto, we can usually schedule your gate work within the week.
Serving East Palo Alto, CA – Our Local Coverage Area
We’re based in the East Palo Alto area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in East Palo Alto
Yes. If your gate is stuck open or won’t close, call (833) 593-6430 and we’ll work to get a technician to your East Palo Alto property as quickly as the schedule allows that day. We treat a gate that won’t secure the property as a priority.
Most residential gate replacements do not require a permit, but if your project involves a new concrete footing, electrical wiring, or a gate that fronts a public right-of-way, the city may require plan review. We can advise you on what East Palo Alto typically asks for and help coordinate the details.
Yes. We work on apartment complex entry gates, parking lot gates, and commercial perimeter gates throughout East Palo Alto. Our technicians service the full range of operators used on larger systems, including DoorKing and Elite commercial units, and we schedule commercial work to minimize disruption.
If your gate is leaning, dragging, or refusing to open, call Gate Repair Union City at (833) 593-6430. Estimates are free, the price is agreed before work starts, and we only do gates.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What East Palo Alto Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Heather Thompson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Amanda Quinn"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Miller