Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Alviso, CA
Gate installation in Alviso means working with bay mud, salt fog, and posts that shift every winter. Most homes here are older bungalows near the historic downtown or newer waterfront townhomes, and both fight the same conditions: marine air that corrodes steel and wet soils that heave posts out of alignment. We’re the gate company that handles the full job, from concrete footings sized for soft ground to hinges that won’t seize in six months. Call (833) 593-6430 when you need an Alviso gate done right the first time.
Why Alviso Homes Are Different
Alviso sits at the southern tip of San Francisco Bay on bay mud, barely above sea level. Much of the town is in a flood zone drained by the Guadalupe River and the old Alviso Slough. That geography changes gate work in three ways. First, salt-laden bay air accelerates rust on steel gates, hinges, and latch hardware faster than anywhere in San Jose. Second, the silt soil and high groundwater mean posts set without proper concrete depth lean after a single wet winter. Third, the older blocks near the historic downtown have original wood and steel fences, and those gates need re-leveling more than hardware swaps. We know the difference between a gate that needs grease and a gate that needs its post re-set in Alviso soil.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Alviso Services
Most Alviso calls come down to two jobs: a gate that won’t swing, slide, or latch properly, and an electric gate that stopped responding to the remote or keypad. Both are covered by our focused gate-only team.
Gate Repair in Alviso
Hinges seize from salt air, posts lean from wet soil, and latches stop catching. We re-level, refasten, and replace worn hardware so the gate swings true again. In Alviso’s older blocks, we see wood posts that have rotted at grade and steel hinges rusted solid. The fix is usually more than a hardware swap; it’s getting the gate back on plane. Gate Repair in Alviso covers the full scope from hinges to posts to full gate rebuilds.
Electric Gate Repair in Alviso
When a gate operator stops responding, the problem is usually at the motor, the control board, or a safety sensor, not the gate itself. Salt air in Alviso also gets into connections and corrodes terminals faster than inland. We diagnose the whole system: operator, receiver, loops, and remotes. Electric Gate Repair in Alviso means a technician who works on LiftMaster, FAAC, BFT, and other major brands.
Gate Installation in Alviso
A new gate in Alviso has to be built for the ground it stands on. Bay mud and seasonal groundwater mean the post footings matter more than the gate itself; a footing that works in San Jose may not hold here. Salt air means hardware choice matters too, galvanized or stainless over bare steel. We build gates that stay square and swing freely through wet winters and salty fog. When you’re ready for a new gate or a full replacement, Gate Installation is what we do every day.
Automatic Gate Installation
Signs you need it
You’re opening and closing a gate by hand every day, or an old operator has failed and replacement parts are no longer available.
What it costs in Alviso
Automatic gate installation in Alviso typically runs between $3,500 and $7,500 for a single swing gate operator with controls and safety sensors.
How we do it
We set the operator mounting post, install the arm and control box, wire the safety sensors, program remotes, and test the full open-close cycle.
Sliding Gate Installation
Signs you need it
Your driveway is narrow or short and a swing gate does not have room to open without hitting a car or the house.
What it costs in Alviso
Sliding gate installation in Alviso typically runs $3,000 to $6,500 for a single-track steel gate with hardware and post.
How we do it
We pour a track bed, set the gate on rollers, hang the gate, install the track and stops, and adjust so it glides without binding.
What Gate Installation Costs in Alviso
| Item | Typical range in Alviso |
|---|---|
| Single swing gate, manual | $1,800 – $4,200 |
| Single swing gate, automatic | $3,500 – $7,500 |
| Sliding gate, manual | $3,000 – $6,500 |
Every estimate is based on your actual site: post depth required for Alviso soil, gate width, and whether we are replacing an existing gate or starting fresh.
How long does gate installation take in Alviso?
Most Alviso gate installations take one to two days on site. Concrete for posts needs time to cure before the gate hangs, so we may schedule the hang a day or two after the footing pour.
Do you handle the full install including electrical?
Yes, we run the power from your panel to the operator, install safety edges and photo eyes, and wire everything so the gate works from remotes and the keypad.
Brands We Service in Alviso
We work on LiftMaster, FAAC, Elite, and Mighty Mule systems specifically, plus BFT, Linear, Viking, Ghost Controls, and DoorKing. Common boards, remotes, and safety sensors for these brands are stocked in our vans, so most Alviso calls finish in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Alviso, CA
| Service | Typical range in Alviso |
|---|---|
| Gate repair, basic alignment or hardware | $180 – $400 |
| Gate repair, post re-set | $600 – $1,100 |
| Electric gate repair, sensor or remote | $150 – $350 |
| Electric gate repair, control board replacement | $500 – $900 |
| Electric gate repair, motor replacement | $700 – $1,300 |
| Manual gate installation, single swing | $1,800 – $4,200 |
| Automatic gate installation, single swing | $3,500 – $7,500 |
| Sliding gate installation | $3,000 – $6,500 |
Alviso jobs run higher when posts need deeper footings in soft bay mud or when salt corrosion has damaged multiple hinges and the latch. Every price is quoted and agreed before we start work.
Neighborhoods We Serve in Alviso
We cover all of Alviso, 95002. Most of our work is around the historic downtown core, the waterfront townhome developments, and the older bungalow streets off North First. Response time is usually same day or next morning depending on call volume.
- Historic downtown Alviso
- Waterfront townhomes near the marina
- Older bungalow blocks off North First Street
- The slough-side streets along the Guadalupe River
Service Area – Cities Near Alviso
We also serve gate repair and installation customers in nearby cities around the South Bay. If you’re in Newark, CA, East Palo Alto, CA, Palo Alto, CA, or Fremont, CA, the same gate-only team can help.
Serving Alviso, CA – Our Local Coverage Area
We’re based in the Alviso area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alviso
Most Alviso repair calls are same day or next morning. We schedule based on where our technicians already are, and since we only do gate work, we are not pulled off your job for an unrelated service call.
Most residential gate repairs and like-for-like replacements do not need a permit. New automated gates may need electrical work permitted by the city or county. We can tell you what applies to your specific project when we see the site.
Some Alviso waterfront townhome and condo communities have HOA rules about gate style, height, and color. We recommend checking before you commit to a design, and we can match common finishes used in those developments.
If your Alviso gate needs work, call (833) 593-6430 for a free estimate. We only do gates, and we do them with the local conditions in mind.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Alviso Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Beatriz Morales"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Gilbert Garcia"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Cole Mercer