Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Atherton, CA
Gate installation in Atherton means something different than it does in most Bay Area towns. On lots of an acre or more, behind long private driveways and mature oak canopies, the gate isn’t a curb-side convenience. It’s the first structural statement of the property, and it has to handle serious weight, legacy architecture, and the expectations of an estate that never stops being evaluated. We install and service gates in Atherton as a gate-only specialist, which means the technician who shows up at your driveway has spent the day thinking about nothing but gate hardware, motors, and the way iron and redwood behave on El Camino Real side streets and private lanes off Elena Avenue. Call (833) 593-6430 for a free estimate.
Why Atherton Homes Are Different
Atherton’s housing stock leans heavily toward custom estates, many of them recent ground-up builds, sitting well back from the road behind signature entrance gates. The gates themselves are rarely stock anything. We see solid redwood driveway gates that have swelled into their frames after three damp winters, ornamental iron gates with hinge posts set in brick columns shared by neighbors, and automation hardware that was installed decades ago and is now buried under landscape changes. The mild but wet winters and persistent morning fog do real work on wood and iron. Gates stick, hinge screws pull loose, and rust gets into the hardware before most homeowners notice. Spring and fall lubrication and adjustment are recurring needs out here, not optional maintenance.
And then there’s the access question. On private lanes off streets like Isabella or Elena, a single gate often serves as the entrance for two or more estates, with the entry column sitting on shared property lines. Repairing or replacing that gate usually means coordinating with a homeowners’ lane association, not just the homeowner who made the call. We’re used to that coordination in Atherton and we plan for it from the first phone call.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Atherton Services
Most Atherton homeowners call us for one of two reasons: a gate that has stopped behaving, or a gate that needs to be installed correctly the first time. These two services cover the vast majority of what we do in 94027.
Gate Repair in Atherton
Atherton gate repair is almost always custom work on heavy iron or redwood driveway gates, often interlocked with legacy automation and private-lane access. We regularly see hinge posts that have shifted in wet winters, sagging gates that drag across pavers, and latch hardware that no longer lines up. On a stock suburban gate you might swap a hinge and be done. Here, the repair has to account for the weight, the column material, and how the gate interacts with whatever motor is attached to it. We work on every part of the gate, from the hinge to the motor. See our Gate Repair in Atherton page for the full breakdown.
Electric Gate Repair in Atherton
Electric gate repair in Atherton usually means diagnosing a system that was installed with the house, or added on during a remodel, and has been running quietly for years until it stopped. Older estates often pair newer motors with control boards and safety loops that are well past their intended life. We come out, test the operator, check the board and safety sensors, and tell you exactly what failed and why. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so most repairs happen on the first visit. See our Electric Gate Repair in Atherton page for details.
Gate Installation in Atherton
Atherton gate installations are rarely “pick a model, dig two holes, hang it.” The driveway is long, the gate is usually oversized, and the columns are often brick or stone, which means the hinge load and the operator mounting have to be planned, measured, and built to match. Add in the wet-season soil movement and the fact that many Atherton properties have a homeowners’ lane association that shares the entry, and you get a job that rewards a gate-only specialist. We handle everything from the first measurement to the final motor programming, and we quote the full price before any work starts. For a broader look at how we approach these jobs, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate in the rain, or you have a new build and the plans call for a gated entrance from day one.
What it costs in Atherton
Automatic gate installation in Atherton typically runs $4,000 – $12,000 depending on gate size, operator type, and whether new columns are required.
How we do it
We measure the opening and column layout, spec an operator matched to gate weight and usage, set the motor and arms, run the power, install the safety loops and edges, and program remotes, keypads, and vehicle sensors.
Driveway Gate Installation
Signs you need it
The existing gate has rotted, sagged, or rusted through, or you’re building a new driveway entrance and want the gate to hold up for decades.
What it costs in Atherton
Driveway gate installation in Atherton typically runs $3,000 – $9,000 for a manual custom gate, with automation adding to the total.
How we do it
We spec the gate for Atherton’s wet winters, set posts and hinges to handle the weight, hang and adjust the gate, and finish with hardware and latches matched to the property’s style.
What Gate Installation Costs in Atherton
| Item | Typical range in Atherton |
|---|---|
| Driveway gate installation (manual) | $3,000 – $9,000 |
| Automatic gate installation | $4,000 – $12,000 |
| Sliding gate installation | $5,000 – $15,000 |
In Atherton, prices climb with gate length and material, masonry or stone columns, long power runs from the house, and shared-lane coordination. Every quote is written and agreed before work starts.
Will I need a permit for a new gate in Atherton?
Often yes, especially when columns, electrical, or a shared lane entrance are involved. We work with Atherton’s requirements and can coordinate with your lane association and the town on the details.
How long does a custom Atherton gate installation take?
Most custom driveway gates take two to four weeks from measurement to completion, depending on fabrication and permitting. Call (833) 593-6430 and we’ll give you a realistic timeline for your specific gate.
Brands We Service in Atherton
We’re certified to work on LiftMaster, FAAC, Elite, and Mighty Mule systems, among others, and we keep common parts for those brands stocked so a service call in Atherton doesn’t turn into a week of waiting. If your gate has a motor and a keypad, we can diagnose it. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Atherton, CA
| Service | Typical range in Atherton |
|---|---|
| Gate repair service call | $85 – $150 |
| Hinge and hardware replacement | $250 – $700 |
| Gate panel or frame repair | $300 – $900 |
| Electric gate motor replacement | $900 – $2,500 |
| Control board replacement | $450 – $1,200 |
| Safety sensor or loop repair | $300 – $800 |
| Remote or keypad programming | $75 – $200 |
| Driveway gate installation (manual) | $3,000 – $9,000 |
| Automatic gate installation | $4,000 – $12,000 |
| Sliding gate installation | $5,000 – $15,000 |
Atherton pricing tends to run at the upper end of these ranges because the gates are heavier, the columns are masonry, and the labor often includes shared-lane coordination. We quote the full price up front, before any work begins, so you know the number before we touch the gate.
Neighborhoods We Serve in Atherton
We cover all of Atherton, including the estates west of El Camino Real and the gated properties back along the private lanes. Typical response for gate repair in Atherton is one business day.
- Lindenwood
- West Atherton
- Atherton Oaks
- Lloyden Park
- Circus Club area
Service Area – Cities Near Atherton
Our gate repair and installation work also reaches the surrounding Peninsula communities. If you’re just over the Atherton line, you’ll still get the same gate-only specialist for the job. We regularly serve North Fair Oaks, CA, Palo Alto, CA, East Palo Alto, CA, and Menlo Park, CA.
Serving Atherton, CA – Our Local Coverage Area
We’re based in the Atherton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Atherton
Most Atherton calls are scheduled within one business day. If the gate is stuck open or stuck closed and it’s a security issue, tell us when you call and we’ll prioritize your visit. Call (833) 593-6430.
Yes. We’re used to coordinating with homeowners’ lane associations on streets like Elena and Isabella, where a single gate serves multiple estates. We’ll work with the association contact and the town if needed.
We do. Whether it’s a repair diagnosis or a full driveway gate installation, we’ll come out, look at the gate, and give you a written price before any work starts. Call (833) 593-6430 to schedule. Your gate, fixed right.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Atherton Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Cole Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Heather Thompson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Amanda Quinn