Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Alviso
Electric gate repair in Alviso typically costs $180 – $680 depending on whether the fault is mechanical, electrical, or both, and most calls can be diagnosed the same day. We work throughout the 95002 ZIP code, from the historic blocks near downtown to the waterfront townhome communities along the slough. Call us at (833) 593-6430 and we’ll walk you through what’s likely wrong before we even arrive.
Alviso gates fail differently than gates in San Jose or Santa Clara. Salt fog off the bay seizes steel hardware while bay-mud heave shifts posts. Our Electric Gate Repair team knows what that means in practice: a motor that stalls is often fighting a hinge post that moved, not a control board that failed. We fix the system, not just the symptom.
Why Gate Repair Union City Is Alviso’s Preferred Electric Gate Repair Company
We only do gates. That’s the whole business. When a LiftMaster operator on a narrow side-yard slide gate in Alviso binds mid-travel, our technicians arrive with the rack, pinion, limit switch, and control board knowledge already loaded. We’re not a fencing contractor squeezing gate work between fence jobs. Gates are what we do, every call, all day.
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Alviso homeowners with older elite-brand operators and newer Mighty Mule budget openers both get the same brand-specific diagnosis. That matters here because salt corrosion and wet-soil post movement create symptoms that look electrical but are often mechanical underneath.
Gerardo Kendrick leads the team, and his approach is simple: diagnose the whole gate, not just the part that beeped. If the post leans, the fix includes the post. If the rack is corroded, the fix includes the rack. That’s why Alviso customers call us back when a different gate on their property develops a new problem.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Alviso
Gate access control in Alviso means keypads, remote receivers, intercom or phone-entry systems, and safety loops that let authorized people through while keeping everyone else out. Nearly every Alviso driveway gate built in the last ten years has some access control component, and when it fails, the gate either ignores commands or accepts them erratically. In Alviso, we typically see access control issues on the waterfront townhome communities near the slough and on older bungalow lots where gates guard tight side yards. Installing a new keypad or replacing a failed receiver usually runs $180 – $420, while a full access control upgrade with phone entry runs $500 – $1,100.
Keypad and remote troubleshooting
When a keypad stops accepting codes in Alviso, salt air is almost always a factor. Corrosion wicks into the wiring terminals and the keypad membrane. We test continuity, clean or replace terminals, and verify the receiver is actually hearing the signal before swapping parts.
Safety loops on narrow side-yard gates
Alviso lots tend to be tight, which means many shared driveways and side yards use a vehicle detection loop to hold the gate open. When the loop fails because wet winter soil shifted a conduit, the gate closes on a car. We re-tune or replace loops and re-set open and close limits to match.
Commercial Gate Operator in Alviso
A commercial gate operator in Alviso handles heavier cycles than a residential unit and usually works with a sliding gate, a barrier arm, or a double-swing configuration at a business or multi-unit entrance. Alviso has light industrial edges near the old slough and a few commercial access points where operators get hammered by damp air and daily use. A commercial operator replacement here typically costs $900 – $2,400 depending on the brand and duty cycle, while a board or limit repair runs $200 – $550.
Heavy-duty slide operators on bay mud
Slide gate operators in Alviso sit on concrete pads that can tilt as the underlying bay mud compresses unevenly. When the pad tilts, the operator strains against the rack. We check pad elevation and operator alignment before replacing any electronic component, because a new board on a tilted pad fails again within months.
Brand-specific commercial service
We work on FAAC and BFT commercial operators specifically. Those systems use hydraulic or electromechanical drives that need brand-specific limit setting and force adjustment. A generic repair that guesses at force settings on a FAAC 412 or BFT Deimos will strip gears. We set them to spec.
Trusted Brands We Service in Alviso
We service LiftMaster, FAAC, and Mighty Mule systems in Alviso, and those cover a big share of what’s installed here. LiftMaster shows up on newer slide and swing gates, Mighty Mule on budget-friendly DIY conversions, and FAAC on commercial entrances. Because we work on these brands constantly, we carry the common boards, remotes, and limit switches that Alviso calls need, which shortens repair time on everything from a dead keypad to an operator that refuses to close. Your gate, fixed right is the standard, not the slogan.
Common Electric Gate Repair Problems We See in Alviso Homes
- Slide gate stalls halfway on a narrow side yard. Bay-mud heave tilts the hinge post, the rack and pinion binds, and the operator’s limit trips early. The fix is re-leveling the post and re-setting limits, not replacing the board.
- Steel hinges and latches seize from salt fog. In the older blocks near downtown Alviso, marine air coats every steel part in a film that rusts fast. The operator strains against a stiff gate, overdraws current, and eventually trips its breaker.
- Posts lean after wet winters and throw the gate out of square. Groundwater sitting on silt soil shifts footing blocks. A gate that dragged on the ground for a season needs sag correction before the operator will run quietly again.
- Safety sensors go out of alignment after soil movement. Photocells and edge sensors only work if the gate path is stable. When the post moves a quarter inch, the beam misses and the gate refuses to close without a manual override.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Alviso, CA
A service call and diagnosis in Alviso runs $85 – $140. Keypad replacement or remote reprogramming runs $120 – $280. Limit switch replacement on a residential operator runs $150 – $350. A control board runs $200 – $550 installed. A full residential electric gate repair, where we address the motor, board, hinges, and alignment in one visit, usually lands between $350 and $800. A replacement operator runs $600 – $1,500 residential, and commercial units run $900 – $2,400. Every job gets a written price before we start. Call (833) 593-6430 and we’ll give you a number you can hold us to.
We Also Serve Cities Near Alviso
We handle electric gate repair across the South Bay. If you’re in Newark, East Palo Alto, Palo Alto, or Fremont, we cover those areas too. Our Electric Gate Repair in Alviso work often sends us up the 237 corridor to neighboring cities, and the same bay-mud and salt-air knowledge applies across the whole shoreline.
Serving Alviso, CA – Our Local Coverage Area
We’re based in the Alviso area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Alviso
It’s usually the gate, not the operator. Salt air and bay-mud heave shift Alviso posts, which binds the rack and pinion, which makes the operator stall. We check the post alignment first and only replace the operator if the motor itself tests bad. Call (833) 593-6430 and we’ll diagnose it over the phone before we schedule the visit.
Because Alviso sits on the bay. Salt fog rolls off the tidal sloughs and Guadalupe River year-round, and steel parts near the water rust fast. San Jose gets some fog but not the constant marine salt. The fix is sealing or replacing the affected hardware and using corrosion-resistant parts on the next repair. We’ll quote it before we start.
Yes. We cycle the gate manually between work stages so you can still get in and out. On slide gates with a detached rack, we can free the gate enough to move by hand while the operator is out. Tell us you need driveway access when you call (833) 593-6430 and we’ll plan around it.
Yes. Any automatic gate operator in California needs working entrapment protection: safety photocells, a reversing edge, or a contact sensor. If your Alviso gate was installed before current standards, we can bring it up to compliance during the repair and document what we did. Call us for a compliance check on any motorized gate on your property.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have something outside that list, call (833) 593-6430 anyway. Many systems share common components, and we’ll tell you over the phone whether it’s worth a service visit.
Get Your Alviso Gate Working Today
If your gate is stuck open, stuck closed, or acting up somewhere in between, call us at (833) 593-6430. We serve all of Alviso’s 95002 ZIP code, from the bayside blocks near the slough to the sides of the 237 corridor. We’ll give you a free estimate over the phone, schedule a diagnosis, and keep your driveway usable while we work. Your gate, fixed right.
Written by Gerardo Kendrick, Owner at Gate Repair Union City, serving Alviso and the South Bay.