Gate Repair in San Lorenzo - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across San Lorenzo

Gate repair in San Lorenzo usually comes down to two things: a gate that won’t swing freely, or an automatic system that won’t respond. Our team at Gate Repair Union City handles both, and we’re in San Lorenzo weekly. We know the 94580 streets, the mid-century tract layouts, and the way the adobe clay under those yards moves with every wet winter and dry summer. When your gate drags against the ground or the opener hums without moving the gate, call us at (833) 593-6430. We’ll give you a straight diagnosis and an upfront price before any work begins.

Call (833) 593-6430

Why Gate Repair Union City Is San Lorenzo’s Preferred Gate Repair Company

We only do gates. That’s the whole business. Not fences, not decks, not general handyman work. Every truck we send into San Lorenzo carries gate hinges, operators, control boards, safety sensors, and the tools specific to the job. When a homeowner on Via Arroyo calls about a sagging side-yard gate, the tech who arrives has already fixed a dozen similar gates that month. That focus means faster diagnosis and fewer return trips.

San Lorenzo customers see the difference. A gate that drags after rain, a LiftMaster opener that clicks but won’t move, a rusted iron gate that won’t latch. Those are routine calls for us. Gerardo Kendrick built this company around gate work specifically, and that narrow focus shows in the details: we know which hardware holds up in adobe clay soil, which finishes survive East Bay sun, and which operators handle narrow side-yard clearances.

When you call for Gate Repair in San Lorenzo, we treat the driveway and side-yard access like the tight, specific spaces they are. A gate that works well there changes how the whole property functions, especially with a detached garage and a narrow path to the backyard.

We serve the full Gate Repair in San Lorenzo area, from Bockman to the neighborhoods around Hesperian Boulevard and the San Lorenzo Creek corridor. The houses we work on were mostly built in the late 1940s and 1950s, and their gates share common failure patterns. Knowing those patterns before we arrive saves you time and money.

Commercial Gate Repair in San Lorenzo

Commercial Gate Repair in San Lorenzo covers the sliding and swing gate systems on apartment complexes, small business lots, and community facilities along Hesperian Boulevard and the industrial edges near the San Lorenzo border. These gates run more cycles per day than a residential gate runs in a month, so the wear shows up in the operator, the track, and the safety loop. We diagnose the failure point, replace what’s worn, and test the full cycle including obstacle detection.

Automatic operator rebuilds

Commercial operators from FAAC, BFT, and DoorKing are built for continuous duty, but San Lorenzo’s wet winters push moisture into control boards and limit switches. We replace capacitors, boards, and drive belts, then run the gate through a full open-close safety sequence. The goal is a gate that passes inspection and keeps residents and tenants moving without a call-back.

Slide track and roller replacement

Sliding commercial gates on clay-heavy ground often drop out of level when the base shifts. We regrade the track, replace seized rollers, and reset the gate so it moves without binding. On most San Lorenzo commercial lots, a slide gate repair runs $450 to $1,400 depending on track damage and whether the motor needs replacement. The price is quoted before work starts.

Iron Gate Repair in San Lorenzo

Iron Gate Repair in San Lorenzo typically means working on the original driveway and side gates that came with mid-century homes, or the replacement welded steel gates added over the decades. Rust is the main enemy. The East Bay’s winter moisture gets into joints, hinge barrels, and the bottom rail where water sits. We cut out rusted sections, weld in new steel, and re-hang the gate with reinforced hinge points.

Weld and rust restoration

We grind back rust to clean metal, weld cracked joints, and patch rotted-through sections with matching steel. Then we prime and paint with a rust-inhibiting finish chosen for coastal East Bay air. For most iron gates in San Lorenzo, weld repair with repainting runs $300 to $800 depending on how much steel needs replacing.

Hinge post and alignment work

A heavy iron gate on a leaning post never closes square. We dig out the post, set it in concrete with proper depth for San Lorenzo’s clay soil, and re-hang the gate so it swings without dragging. This is one of the most common iron gate repairs we do in the 94580 zip code.

Trusted Brands We Service in San Lorenzo

We work on the systems San Lorenzo homes and businesses actually have installed. That includes LiftMaster and Elite operators on older retrofit jobs, Mighty Mule and Ghost Controls units on DIY setups that never worked quite right, and FAAC and BFT systems on commercial properties along Hesperian. We carry common control boards, remotes, safety sensors, and drive belts for these brands, which means we can often complete a repair on the first visit instead of ordering a part and coming back. For San Lorenzo customers with an automatic gate, brand-specific knowledge is the difference between a fix and a guess.

Common Gate Repair Problems We See in San Lorenzo Homes

• Posts leaning after winter rain. Most original San Lorenzo tract-home gates were hung on fence posts set directly into adobe clay without concrete footings. After heavy rains, the clay softens and the posts lean, which makes the gate drag and the latch miss. We reset posts with proper concrete footings so the problem doesn’t return next season.
• Wooden gates that swell and stick. The East Bay’s wet winters make wood absorb moisture and expand. Gates that swung fine in October jam by January. We re-hang with proper clearance and seal the wood to slow the cycle, then re-check hardware when summer shrink happens.
• UV damage on original 1940s and 1950s gates. San Lorenzo gets real sun exposure. Fifty or sixty years of it fades finishes, cracks wood, and accelerates rust on metal hardware. We see gates that are structurally intact but cosmetically exhausted. We repair the structure, then refinish so the gate looks as functional as it now operates.
• Narrow side-yard gates on clay soil. The typical San Lorenzo side yard is three to four feet wide, bordered by a stucco house and a fence line. Over time, the soil shifts and the gate scrapes the path or the house. We realign hinges, trim the gate bottom where needed, and reset posts so the gate clears properly in both wet and dry seasons.

Pricing for Gate Repair in San Lorenzo, CA

We Also Serve Cities Near San Lorenzo

Our gate repair coverage extends through the neighboring East Bay communities of San Leandro, Fairview, Union City, and Newark. If you’re in one of those areas and need a gate specialist, the same team and same upfront pricing apply. We route San Lorenzo and San Leandro calls together when scheduling, so response times are consistent across the area.

FAQs About Gate Repair in San Lorenzo